Skip to calculator

Square Footage Calculator

To calculate square footage, measure the length and width in feet and multiply them. A 12 ft × 14 ft room is 168 sq ft. For odd shapes, split the space into rectangles, find each area, and add them together.

Calculator

Enter measurements in
Quick add a typical room (edit the sizes after):

Project options: waste and price
See the waste table in the guide below.
Buying or selling? Compare with a listing

Compares the listing with the rooms you marked “Finished, above grade”. Results appear in the Home size tab.

Enter a length and width (or pick a quick-add room) to see the total.

Total: 0 sq ft

How to Calculate Square Footage (Step by Step)

Square footage is the area of a floor in square feet: how many 1 ft × 1 ft squares it would take to cover it. For a rectangle that is simply length × width. Everything else on this page is about getting those two numbers right and dealing with rooms that aren’t rectangles.

  1. Sketch the floor. A rough drawing on paper is enough. Mark doorways, closets, and anything that sticks in or out.
  2. Split it into simple shapes. Rectangles first, then triangles, circles, or trapezoids for angled walls, curved bays and bump-outs. The shapes must not overlap.
  3. Measure each shape to the nearest inch, wall to wall.
  4. Find each area: length × width for rectangles (the calculator shows the formula for every other shape).
  5. Add the pieces, subtract anything you won’t cover (a fireplace hearth, a kitchen island set on the subfloor), and add the rooms together.

Worked example: a bedroom that measures 12 ft 6 in by 10 ft 3 in is 12.5 ft × 10.25 ft = 128.1 sq ft.

How to measure a room

Feet and inches: the conversion that trips people up

Inches are twelfths of a foot, not tenths. 12 ft 6 in is 12.5 ft, not 12.6 ft. Typing a room that measures 11′ 9″ × 13′ 9″ as 11.9 × 13.9 gives 165.4 sq ft instead of 161.6 sq ft, which is 3.8 sq ft too much in one room. Across a whole house it adds up. The calculator’s feet + inches mode avoids the problem; if you convert by hand, use this table.

InchesFeet
1 in0.083
2 in0.167
3 in0.250
4 in0.333
5 in0.417
6 in0.500
7 in0.583
8 in0.667
9 in0.750
10 in0.833
11 in0.917

Square Footage of Irregular Rooms

Almost no room is a perfect rectangle once you include closets, bays and angled corners. The rule is always the same: split the floor into shapes you can measure, then add or subtract. In the calculator, use + Add a part for extra areas and − Subtract an area for the bits you won’t cover.

L-shaped room split into two rectanglesA 20 by 12 foot rectangle A with an 8 by 10 foot rectangle B below its left end. 240 plus 80 equals 320 square feet.A: 20 × 12 = 240B: 8 × 10= 8020 ft12 ft8 ft10 ftTotal320 sq ft
L-shaped rooms: split into two rectangles that don’t overlap. 240 + 80 = 320 sq ft. It doesn’t matter which way you split it, as long as nothing is counted twice.
Subtracting an area you will not coverA 16 by 20 foot living room with a 2 by 5 foot fireplace hearth cut out. 320 minus 10 equals 310 square feet of flooring.hearth16 × 20 = 320− 2 × 5 = 10= 310 sq ft20 ft16 ft
Subtracting: measure the whole room, then subtract what won’t get flooring. For a home’s size you would not subtract a hearth; for a flooring order you would.
Room with a bay window bump-outA 12 by 14 foot rectangle plus a bay trapezoid with parallel sides of 8 and 4 feet and 2 feet deep, which adds 12 square feet.12 × 14 = 168bayBay: (8 + 4) ÷ 2 × 2 = 12 · Total 180 sq ft
Bay windows and angled bump-outs are trapezoids: average the two parallel sides and multiply by the depth.
Room with an angled cornerA 14 by 12 foot room with one corner cut off at an angle by a 6 by 6 foot triangle. 168 minus 18 equals 150 square feet.14 × 12 = 168½×6×6− 18 = 150 sq ftMeasure the full rectangle, then subtract the missing triangle
Angled corners: measure the full rectangle, then subtract the missing triangle (½ × base × height).

Curved walls: a half-round bay with an 8 ft straight side is ½ × π × 4² = 25.1 sq ft. Triangles where you can’t find the height: measure all three sides and choose “Triangle (three sides)”; the calculator uses Heron’s formula. Closets: add each one as a part of its room, so the room total stays correct when you change it.

How to Calculate the Square Footage of a House

For flooring or paint, you measure every surface you’ll cover. A home’s official size is different: it is finished, above-grade living area, and several spaces you walk on every day don’t count. Since April 2022, appraisers working on loans sold to Fannie Mae have had to follow the ANSI Z765-2021 measuring standard, and Freddie Mac followed in November 2023. Its main rules, in plain English:

Counts in the home’s sizeReported separatelyDoesn’t count
Finished, heated rooms above ground on every floorFinished basement or any level partly below ground (even a walkout)Garages, attached or not
Hallways, closets, and the walls themselves (measured outside)Finished rooms where less than half the floor has a 7 ft ceilingPorches, decks, patios, balconies
Stairs, on the floor they go down fromFinished space you can only reach through unfinished spaceOpen-to-below areas (two-storey foyers)
Sloped-ceiling rooms where at least half the floor has a 7 ft ceilingFloor under a ceiling lower than 5 ft; unheated sunrooms; unfinished space
What counts in a two-storey houseCross-section of a two-storey home. The main and upper floors count as finished above-grade area. The open foyer void does not count on the upper floor. The basement is reported separately and the attached garage is excluded.openUpper ✓Main ✓Basement: separateGarage ✗grade
In a two-storey house, the void over an open foyer isn’t counted on the upper floor, the basement is a separate figure, and the garage is left out.
Sloped ceiling: which floor area countsCross-section of an attic room 20 feet wide with a sloped roof. Floor under a ceiling lower than 5 feet is excluded at both sides. The middle section where the ceiling is 7 feet or more must be at least half of the counted floor.5 ft7 ft✗ <5 ft✗ <5 ftcounted floor7 ft+
Under a sloped roof, floor under a ceiling lower than 5 ft is left out, and the room only counts as finished living area if at least half of the remaining floor reaches 7 ft.

Inside or outside? Appraisers measure a detached or attached single-family house around the outside walls, to the nearest inch or tenth of a foot, and report the total to the nearest whole square foot. Room-by-room interior measuring (what this calculator does) skips the thickness of every wall, so it always comes out smaller. Condos are commonly measured differently, often from the interior walls, so check the building’s or the lender’s method.

New report wording: appraisal reports for loans sold to Fannie Mae and Freddie Mac moved to the redesigned UAD 3.6 format, which became mandatory for new submissions on November 2, 2026 (some lenders have a temporary exception into 2027). It reports “above-grade finished area” and “below-grade finished area” instead of the old “gross living area”, but the measuring rules are the same ANSI ones.

To try it, set each room’s Type of space in the calculator and open the Home size tab.

Why your number differs from the listing

Enter the listed size in Compare with a listing: the calculator shows the gap and the real price per square foot of what you measured.

Measurement Mistakes That Change the Total

MistakeWhat happensFix
Typing 11′ 9″ as 11.9About 2.4% too high per roomUse feet + inches mode, or divide inches by 12
Rounding every wall up to the next footA 12′ 1″ × 10′ 1″ room becomes 13 × 11 = 143 sq ft instead of 122: 17% too highMeasure and enter to the nearest inch; add waste once, at the end
Measuring to baseboards or furnitureShort by ½ in to 1 in on each wallMeasure wall to wall at floor level
Overlapping rectangles in an L-shapeThe corner is counted twiceSplit so the pieces only touch
Forgetting closets and alcovesFlooring order comes up shortAdd them as parts of the room
Assuming walls are squareErrors in long, older roomsMeasure both ends; use the trapezoid shape if they differ
Comparing an interior total with a listingLooks like the listing is inflatedExpect your total to be lower; see the section above

Common Room Sizes and What They Need

Typical sizes for planning. Flooring boxes assume 20 sq ft per box plus 10% waste. Wall paint assumes 8 ft ceilings, two coats and 350 sq ft per gallon, with no deduction for doors or windows (round up to whole gallons).

RoomTypical sizeSq ftSq ydm²Flooring boxesWall paint (gal)
Small bedroom10 × 10 ft10011.19.361.8
Standard bedroom12 × 12 ft14416.013.482.2
Primary bedroom14 × 16 ft22424.920.8132.7
Full bathroom5 × 8 ft404.43.731.2
Primary bathroom10 × 12 ft12013.311.172.0
Kitchen12 × 15 ft18020.016.7102.5
Dining room12 × 14 ft16818.715.6102.4
Living room16 × 20 ft32035.629.7183.3
One-car garage12 × 22 ft26429.324.5153.1
Two-car garage22 × 22 ft48453.845.0274.0

What does 1,000 square feet look like?

About a 25 ft × 40 ft rectangle, roughly two two-car garages side by side, or the floor of a typical two-bedroom apartment. It is 111.1 sq yd, 92.9 m², and about 2.3% of an acre.

Square Feet Conversions

1 sq yd = 9 sq ft. 1 m² = 10.764 sq ft. 1 acre = 43,560 sq ft. 1 sq ft = 144 sq in.

Sq ftSq ydm²Acres
10011.19.30.0023
14416.013.40.0033
25027.823.20.0057
50055.646.50.0115
1,000111.192.90.0230
1,500166.7139.40.0344
2,000222.2185.80.0459
2,500277.8232.30.0574
3,000333.3278.70.0689
43,5604,840.04,046.91

From Square Footage to Materials and Cost

The area is only the start. Every material is sold in fixed units (boxes, rolls, sheets, gallons), and every layout wastes some at the edges. Add the waste allowance once, to the total, rather than rounding every room up.

LayoutTypical extra
Simple rectangular rooms, planks or tile laid straight5–7%
Several rooms, closets, doorways, many corners10–12%
Diagonal tile, herringbone, or large-format tile15–17%
Patterned carpet or tile where the pattern must line up15–20%

Then take the total to the right calculator: BTU calculator to size an air conditioner or heater, laminate flooring for boxes and underlayment, tile for tiles, grout and thinset, flooring cost to compare materials and installation, paint and drywall for walls (they use wall area, so you’ll also need the ceiling height), or wallpaper. For a roof, square footage works differently because of the pitch: use the roof square footage calculator.

Keep the link: Copy link to these rooms saves every room and part in the address, so you can reopen it at the store or send it to an installer.

Square Footage FAQ

Measure the length and width of the space in feet and multiply them. A 12 ft × 14 ft room is 168 sq ft. For irregular rooms, split the floor into rectangles (and triangles or circles where needed), work out each area, and add them. For a whole home, add every room.

Yes. 12 ft × 12 ft = 144 sq ft, which is 16 square yards or about 13.4 m². If the room has a closet you want floored too, measure it separately and add it.

Split the L into two rectangles that don’t overlap, measure each, and add them. For example, a 20 × 12 ft section plus an 8 × 10 ft section is 240 + 80 = 320 sq ft. Choose the L-shape option in the calculator to enter both parts.

Convert the inches to a fraction of a foot by dividing by 12, then multiply. 12 ft 6 in is 12.5 ft and 10 ft 3 in is 10.25 ft, so the room is 12.5 × 10.25 = 128.1 sq ft. Don’t type 12 ft 6 in as 12.6, because 12.6 ft is 12 ft 7.2 in.

Not in a home’s finished living area. Under the ANSI Z765 standard that appraisers use for loans sold to Fannie Mae and Freddie Mac, garages are reported separately, even when attached. A garage converted into heated, finished living space can count. For a garage floor coating or flooring project, measure it like any other room.

It is reported separately. Under ANSI Z765, any level that is partly or fully below ground is below-grade area, however nicely it’s finished, so it isn’t added to the above-grade total. Listings often show it as a separate figure or mention it in the description.

About 25 ft × 40 ft, roughly the size of two two-car garages side by side, or a two-bedroom apartment. It is 111.1 square yards, 92.9 m², or about 2.3% of an acre.

Divide by 9, because a square yard is 3 ft × 3 ft. 144 sq ft is 16 sq yd and 1,000 sq ft is 111.1 sq yd. Carpet is usually priced per square yard, so convert before comparing quotes.

Sources and Method

Formulas: rectangle l × w; triangle ½ × b × h or Heron’s formula; circle π × r²; trapezoid (a + b) ÷ 2 × h. Conversions use exact definitions (1 ft = 0.3048 m). The home-size view applies the ANSI Z765-2021 rules described above to your own measurements; it doesn’t replace a measurement by an appraiser. See our methodology and calculation assumptions.

Written by K. Lynch. Last updated November 19, 2026. For a sale, refinance or legal dispute, have the home measured by a licensed appraiser.

Related Interior Calculators

Disclaimer: Results are estimates for planning. Home-size figures are not an appraisal and may differ from official measurements. See Methodology and Data Sources.