Skip to calculator

Stain Calculator for Fences and Decks

A 100 ft privacy fence 6 ft high needs about 3 1/4 gallons of stain for two coats on one side, so buy 4 gallons. Pick fence or deck below for your gallons, coats and cost.

Stain calculator

Add up all the sides of the fence for the length. Gates count as fence.

Stain, wood and coats

Prices (optional)

Enter the fence length and height.

Why Your Fence Isn’t Length × Height

Most stain calculators multiply the fence’s length by its height. That’s fine for the board side of a privacy fence and wrong for almost everything else, because stain goes on wood, not on the space the fence takes up. This calculator uses the fence calculator’s parts list and adds up the faces and edges of every board, rail and post that shows on the side you’re staining.

Here is the same 100 ft run, 6 ft high, in each style. Its outline is 600 sq ft a side.

StyleBoard sidePost-and-rail side
Privacy602 sq ft751 sq ft
Picket492 sq ft632 sq ft
Board on board684 sq ft832 sq ft
Shadowbox814 sq ft814 sq ft

A picket fence has less wood than its outline because a third of it is gaps, though the stain still has to reach the edges of each picket and the rails behind. Board on board has more, because the boards overlap and every edge shows. And on every style the post-and-rail side takes more than the smooth side: a 6 ft fence has three rails, and on this run they make that side about 148 sq ft bigger. If you’re only doing your own side, check which side that is before you buy.

The Label Figure and Your Wood

Coverage on a can is measured on smooth, sound wood, and real fences and decks rarely are. Cabot puts its oil-based semi-transparent stain at 400 to 600 sq ft a gallon on smooth wood but only 150 to 250 on rough wood, so rough-sawn boards can take two or three times as much. Ready Seal’s figures show the wood matters too: about 125 sq ft a gallon on cedar, 150 on pine and 175 to 200 on harder woods. Old grey boards are just as thirsty.

Water-based stains are usually two-coat products, and the second coat goes on thinner. Behr gives 250 to 300 sq ft a gallon for the first coat of its semi-transparent stain and 500 to 600 for the second, which is why the calculator’s second coat takes about half the stain of the first. Solid color stain is similar at 200 to 400, then 400 to 800. Pick the stain type and wood under “Stain, wood and coats”, or type the figure printed on your own can.

Decks: the Floor Is Only Part of It

A deck floor is simple, length times width, but railings carry a surprising amount of wood. A standard 36 in railing with 2 × 2 balusters under 4 in apart, two rails, a cap and posts has about 6.2 sq ft of wood to stain for every foot of railing, because each baluster has four sides. A 16 × 12 ft deck has 192 sq ft of floor; add 40 ft of railing and three 3 ft wide steps and it’s 453 sq ft, which takes it from about 1 gallon to 2 1/2 gallons for two coats.

Small decks go a long way on a little stain. I stained the small deck at my house, a 12 × 6 ft floor, in a dark brown stain. A floor that size is 72 sq ft, which the calculator puts at about 1/2 gallon for two coats of a water-based semi-transparent, so two quarts would cover it with a little to spare.

What Staining Costs

Pros price fences by the length and decks by the area. Angi puts fence staining at $4 to $14 per linear foot with pro labor at $50 to $110 an hour, so the 100 ft fence above would be about $400 to $1,400 to have stained. For decks, Angi gives $2 to $4 per sq ft all in, with labor alone at $1 to $2.50 per sq ft and railings at $4 to $12.50 per linear foot. On the 16 × 12 ft deck with 40 ft of railing, that’s $190 to $480 for the floor’s labor and $160 to $500 for the railing.

Doing it yourself, the stain is most of the bill. Angi lists stain at $20 to $120 a gallon depending on type, so the 4 gallons for one side of the 100 ft fence would be about $80 to $480, plus brushes or a sprayer. Type your own prices into the calculator to see the total for your job.

Stain Questions

About 3/4 gallon for two coats of a water-based semi-transparent stain on the 144 sq ft floor, so one gallon. A one-coat oil stain at 500 sq ft a gallon needs about 1/4 gallon. Railings change the answer most: 36 ft of railing round three sides adds about 222 sq ft of wood and takes it to 2 gallons.

About 917 sq ft with two coats of a water-based semi-transparent, which is the board side of roughly 152 ft of 6 ft privacy fence, or about 68 ft if you do both sides. A one-coat oil stain at 500 sq ft a gallon on smooth wood stretches the same pail to about 2,500 sq ft, but on rough-sawn boards at 200 sq ft a gallon it covers only about 1,000.

For a 6 ft privacy fence, about 3 1/4 gallons to stain the board side with two coats of water-based semi-transparent stain, and about 7 1/2 gallons for both sides. The post-and-rail side takes more than the board side because its rails and posts make it about 148 sq ft bigger.

Follow the can. Behr says its semi-transparent stain needs 2 thin coats and recommends 2 for its solid color stain, while Cabot’s oil-based semi-transparent and Ready Seal are sold as one-coat stains. Because the second coat goes on thinner, two coats of Behr use about 50% more stain than one, not twice as much.

The coverage figures come from Behr’s product pages and data sheet, Cabot’s product listing and Ready Seal’s own answers, and the prices from Angi’s fence and deck staining guides, which show no update date beyond their 2026 and 2025 data labels. Lumber sizes are the standard ones: 5/8 in fence boards, 2 × 4 rails, 4 × 4 posts and 2 × 2 balusters. We test the engine on thousands of random fences and decks to check that the parts always add up to the total and that what it tells you to buy always covers what you need.

Written and checked by Kris Lynch. Not reviewed by a licensed professional. See our methodology. Spotted a problem? Tell us. Updates: Nov 2026, launched.

Related Calculators